Divinol Profi Lube HHS
Art-Nr.: 23360 LK
Fully synthetic, adhesive spray
Shake can well before use. Clean the object to be sprayed and let dry. Spray Divinol Profi Lube HHS evenly, with a space of 20 cm and let it dry some minutes before use. Do not spray on hot surfaces!
Art-Nr.: 23360 LK
Fully synthetic, adhesive spray
Shake can well before use. Clean the object to be sprayed and let dry. Spray Divinol Profi Lube HHS evenly, with a space of 20 cm and let it dry some minutes before use. Do not spray on hot surfaces!
Divinol Alufelgenreiniger
Art-Nr.: 89450
Liquid rim cleaner for steel and aluminium
Divinol Alufelgenreiniger is a special-purpose cleaner aluminium and steel rims. Spray the rims and wash off after a short reaction time. In case of extremely heavy dirt use a sponge or brush. Caution: With BMW motorbikes stains may remain at the unlacquered plastic components of the front axles that cannot be removed. Therefore, Divinol Alufelgenreiniger must here be washed off immediately after use on plastic components
Art-Nr.: 89450
Liquid rim cleaner for steel and aluminium
Divinol Alufelgenreiniger is a special-purpose cleaner aluminium and steel rims. Spray the rims and wash off after a short reaction time. In case of extremely heavy dirt use a sponge or brush. Caution: With BMW motorbikes stains may remain at the unlacquered plastic components of the front axles that cannot be removed. Therefore, Divinol Alufelgenreiniger must here be washed off immediately after use on plastic components
Divinol Multi-Fluid
Art-Nr.: 22530
Multipurpose maintenance and servicing fluid
Corrosion protection:
When using Divinol Multi-Fluid, the length of the protection period depends on the material which has to be protected and on the environmental conditions. Under normal circumstances, the following protection effect can be expected for steel:
1. Covered or inside more than 1 year
2. Outside, but protected min. 6 months up to 1 year
3. Normal outside conditions min. 30 days up to 60 days
4. Extreme outside conditions min. 15 days up to 30 days
(next to the coast, in case of high air humidity etc.) For protection which has to last longer, Divinol Multi-Fluid should be applied repeatedly. Between 60 and 90 minutes, depending on the room temperature.
Typical usage ranges are the following sectors: automobile, office, electronics, household, industry, tool and engineering industry, agriculture, navigation, sports devices, guns etc. Divinol Multi-Fluid can simply be applied onto the affected parts. The remaining very thin film doesn’t dry and is compatible with lacquer, plastic, and rubber. The parts can be sprayed with Divinol MULTI-FLUID while they are wet, as the product displaces humidity very fast
Art-Nr.: 22530
Multipurpose maintenance and servicing fluid
Corrosion protection:
When using Divinol Multi-Fluid, the length of the protection period depends on the material which has to be protected and on the environmental conditions. Under normal circumstances, the following protection effect can be expected for steel:
1. Covered or inside more than 1 year
2. Outside, but protected min. 6 months up to 1 year
3. Normal outside conditions min. 30 days up to 60 days
4. Extreme outside conditions min. 15 days up to 30 days
(next to the coast, in case of high air humidity etc.) For protection which has to last longer, Divinol Multi-Fluid should be applied repeatedly. Between 60 and 90 minutes, depending on the room temperature.
Typical usage ranges are the following sectors: automobile, office, electronics, household, industry, tool and engineering industry, agriculture, navigation, sports devices, guns etc. Divinol Multi-Fluid can simply be applied onto the affected parts. The remaining very thin film doesn’t dry and is compatible with lacquer, plastic, and rubber. The parts can be sprayed with Divinol MULTI-FLUID while they are wet, as the product displaces humidity very fast
Divinol Profi Lube KWS
Art-Nr.: 33210 LK
Fully synthetic oorrosion protection spray
Divinol Profi Lube KWS is applied by spraying. Amount used per square meter approx. 30-50 grams. The protective film should be applied several times. Treated surfaces can be cleaned with Divinol Gerätereiniger Forte. Do not spray on hot surfaces!
Art-Nr.: 33210 LK
Fully synthetic oorrosion protection spray
Divinol Profi Lube KWS is applied by spraying. Amount used per square meter approx. 30-50 grams. The protective film should be applied several times. Treated surfaces can be cleaned with Divinol Gerätereiniger Forte. Do not spray on hot surfaces!
Divinol Profi Lube SL
Art-Nr.: 62301 LK
Special lubricant for the universal use
Divinol Profi Lube SL is a special lubricant based on synthetic oils for the universal use, e. g. for chains, bowden cables, open ropes, rolls and friction marks, which have to bear high shock loads, vibrations and/or strong atmospheric exposures. Do not spary on hot surfaces!
Art-Nr.: 62301 LK
Special lubricant for the universal use
Divinol Profi Lube SL is a special lubricant based on synthetic oils for the universal use, e. g. for chains, bowden cables, open ropes, rolls and friction marks, which have to bear high shock loads, vibrations and/or strong atmospheric exposures. Do not spary on hot surfaces!
Divinol Profi Lube MP
Art-Nr.: 22540 LK
High-tech maintenance spray for professional use
When using Divinol Profi Lube MP, the length of the protection period depends on the material which has to be protected and on the environmental conditions. Under normal circumstances, the following protection effect can be expected for steel:
Covered or inside more than 1 year
Outside, but protected min. 6 months up to 1 year
Normal outside conditions min. 30 to 60 days
Extreme outside conditions (next to the coast, in case of high air humidity etc.) min. 15 to 30 days
For protection which has to last longer, Divinol Profi Lube MP should be applied repeatedly. Between 60 – 90 min, depending on the room temperature
Typical usage range: automobile, office, electricity, household, industry, tool and engineering industry, agriculture, navigation, sports devices, guns etc. Divinol Profi Lube MP can simply be sprayed onto the affected parts. The remaining very thin film doesn’t dry and is compatible with lacquer, plastic, and rubber. Parts can already be sprayed with Divinol Profi Lube MP while they are wet, as the product displaces humidity very fast. Do not spray on hot surfaces!
Art-Nr.: 22540 LK
High-tech maintenance spray for professional use
When using Divinol Profi Lube MP, the length of the protection period depends on the material which has to be protected and on the environmental conditions. Under normal circumstances, the following protection effect can be expected for steel:
Covered or inside more than 1 year
Outside, but protected min. 6 months up to 1 year
Normal outside conditions min. 30 to 60 days
Extreme outside conditions (next to the coast, in case of high air humidity etc.) min. 15 to 30 days
For protection which has to last longer, Divinol Profi Lube MP should be applied repeatedly. Between 60 – 90 min, depending on the room temperature
Typical usage range: automobile, office, electricity, household, industry, tool and engineering industry, agriculture, navigation, sports devices, guns etc. Divinol Profi Lube MP can simply be sprayed onto the affected parts. The remaining very thin film doesn’t dry and is compatible with lacquer, plastic, and rubber. Parts can already be sprayed with Divinol Profi Lube MP while they are wet, as the product displaces humidity very fast. Do not spray on hot surfaces!
Divinol Gerätereiniger Forte
Art-Nr.: 12300
Multipurpose cleaner
The dirty parts should be sprayed with Divinol Gerätereiniger Forte and left for some minutes (no drying of Divinol Gerätereiniger Forte on plane surfaces) . A paint brush can be used to clean the parts. Afterwards the parts should be rinsed with water, if possible with high pressure and at last the parts should be dried with compressed air. If the parts are very dirty put them in a cleaner bath for several hours.
Art-Nr.: 12300
Multipurpose cleaner
The dirty parts should be sprayed with Divinol Gerätereiniger Forte and left for some minutes (no drying of Divinol Gerätereiniger Forte on plane surfaces) . A paint brush can be used to clean the parts. Afterwards the parts should be rinsed with water, if possible with high pressure and at last the parts should be dried with compressed air. If the parts are very dirty put them in a cleaner bath for several hours.
Divinol HD-Reiniger 1434
Art-Nr.: 95920
Liquid cleaner for workshops, agricultural machines, trucks and tarpaulins
Ideal for application on HD equipment, spraying application or with other tools:
First vehicle spray
Second short soak in very rough dirt to brush
Third spray with clean water
Divinol HD-Reiniger 1434 can be diluted up to 1:5 and easily disposed through an oil separator.
Areas of application:
Tractors, harvesters, trailers, jeeps, quad bikes, motocross, truck tarpaulins, chassis, vehicle parts
Art-Nr.: 95920
Liquid cleaner for workshops, agricultural machines, trucks and tarpaulins
Ideal for application on HD equipment, spraying application or with other tools:
First vehicle spray
Second short soak in very rough dirt to brush
Third spray with clean water
Divinol HD-Reiniger 1434 can be diluted up to 1:5 and easily disposed through an oil separator.
Areas of application:
Tractors, harvesters, trailers, jeeps, quad bikes, motocross, truck tarpaulins, chassis, vehicle parts
Divinol Kaltreiniger U 522
Art-Nr.: 05220
Multipurpose cleaner
Apply with sprayer, brush, sponge or brush. After a certain reation time wash the parts with water. Divinol Kaltreiniger U 522 is also applicable in part-wash-devices
Art-Nr.: 05220
Multipurpose cleaner
Apply with sprayer, brush, sponge or brush. After a certain reation time wash the parts with water. Divinol Kaltreiniger U 522 is also applicable in part-wash-devices
Divinol Reiniger 73
Art-Nr.: 09331
General-purpose cleaner for an easy removing of dirt, oil, grease and gummings.
Use Divinol Reiniger 73 undiluted.
General-purpose cleaner for an easy removing of dirt, oil, grease and gummings.
The product can be used for degreasing of motors, chassis, machines, tools and others.
Usage in industrial productions for the cleaning of parts and for degreasing.
Please apply Divinol Reiniger 73 with spraying pistol, brush or sponge.
The cleaner evaporates without residues.
The approval for the usage of Divinol Reiniger 73 in the standard hydrocarbon systems Universal 81C
and Compact 80C from Dürr Ecoclean GmbH, 70773 Filderstadt is available.
Art-Nr.: 09331
General-purpose cleaner for an easy removing of dirt, oil, grease and gummings.
Use Divinol Reiniger 73 undiluted.
General-purpose cleaner for an easy removing of dirt, oil, grease and gummings.
The product can be used for degreasing of motors, chassis, machines, tools and others.
Usage in industrial productions for the cleaning of parts and for degreasing.
Please apply Divinol Reiniger 73 with spraying pistol, brush or sponge.
The cleaner evaporates without residues.
The approval for the usage of Divinol Reiniger 73 in the standard hydrocarbon systems Universal 81C
and Compact 80C from Dürr Ecoclean GmbH, 70773 Filderstadt is available.
Divinol Sprühöl graphitiert
Art-Nr.: 80800
Mineral oil spray oil with graphite
Divinol Sprühöl graphitiert is used for wetting and preservation of commercial vehicles, machinery, tools, spare parts, metals etc. The product is sprayed iand guarantees temporary corrosion protection, if the parts are protected from the elements, during storage.
Art-Nr.: 80800
Mineral oil spray oil with graphite
Divinol Sprühöl graphitiert is used for wetting and preservation of commercial vehicles, machinery, tools, spare parts, metals etc. The product is sprayed iand guarantees temporary corrosion protection, if the parts are protected from the elements, during storage.
Divinol Sprühöl
Art-Nr.: 31080
Spraying oil for corrosion protection
Divinol Sprühöl is used for wetting and preservation of commercial vehicles, machinery, tools, spare parts, metals etc. The product is sprayed and guarantees temporary corrosion protection if the parts are stored protected from weather. The product should not get in contact with rubber parts.
Art-Nr.: 31080
Spraying oil for corrosion protection
Divinol Sprühöl is used for wetting and preservation of commercial vehicles, machinery, tools, spare parts, metals etc. The product is sprayed and guarantees temporary corrosion protection if the parts are stored protected from weather. The product should not get in contact with rubber parts.