Divinol HE 46
Art-Nr.: 48800
Synthetic and biologically degradable ester used in hydraulic aggregates or machines working in agriculture, construction and forestry sector.
DIN ISO 15380 (HEES); DIN 51524-3 (HVLP)
Divinol HE 46 is used in hydraulic aggregates which are working under different climate conditions and if there is
a danger of leakage and the oil could get in contact with the ground or the ground water.
It is mainly used in machines working in the agriculture and forestry, building or water economy as well as for vehicles used at dumping grounds or on ski runs.
The oil should be changed according to the thermal load and according to the specifications of the producer. If Divinol HE 46 is mixed with residue quantity of mineral oil the biological degradability will be reduced. Therefore, the aggregate in question should always be emptied and rinsed thoroughly before changing from. Should the content of mineral oil be too high it may lead to worse foaming characteristics.
We recommend following the requirements of the VDMA 24569 when changing to a biologically degradable hydraulic fluids
In comparison to products based on vegetable tri-glycerides Divinol HE 46 shows significantly better high temperature-oxidation stability.
Art-Nr.: 48800
Synthetic and biologically degradable ester used in hydraulic aggregates or machines working in agriculture, construction and forestry sector.
DIN ISO 15380 (HEES); DIN 51524-3 (HVLP)
Divinol HE 46 is used in hydraulic aggregates which are working under different climate conditions and if there is
a danger of leakage and the oil could get in contact with the ground or the ground water.
It is mainly used in machines working in the agriculture and forestry, building or water economy as well as for vehicles used at dumping grounds or on ski runs.
The oil should be changed according to the thermal load and according to the specifications of the producer. If Divinol HE 46 is mixed with residue quantity of mineral oil the biological degradability will be reduced. Therefore, the aggregate in question should always be emptied and rinsed thoroughly before changing from. Should the content of mineral oil be too high it may lead to worse foaming characteristics.
We recommend following the requirements of the VDMA 24569 when changing to a biologically degradable hydraulic fluids
In comparison to products based on vegetable tri-glycerides Divinol HE 46 shows significantly better high temperature-oxidation stability.
Divinol Bio-Hydraulik
Art-Nr.: 28370
Synthetic high performance hydraulic oil based on satured esters.
exceeds DIN ISO 15380 HEES
VDMA 24568
DIN 51524-2 excluding wet ISO4263-1
DIN 51524-3 excluding wet ISO4263-1
Swedish Standard SS155434
Ecolabel Euromargerite
Austrian Ecolabel
Divinol Bio-Hydraulik can easily be used for hydraulic systems in forestry, construction or engineering industry in environment sensitive areas. Among others, Divinol Bio-Hydraulik is suitable for:
Harvesters and other forestry
Excavators and trucks for example in water protection areas
Fork lifts, telescop loaders and cranes
Compressors
Water weir hydraulics
If Divinol Bio-Hydraulik is used in a hydraulic system, which was previously working with mineral hydraulic oil, Divinol Bio-Hydraulik can dissolve existing deposits in the hydraulic system. Before using Divinol Bio-Hydraulik rinse the hydraulic system and empty it completely - do not mix with mineral hydraulic oil. When changing to biodergradable hydraulic fluids, please regard the requirements of the VDMA 24569 as well as the instructions of the machine manufacturers.
Art-Nr.: 28370
Synthetic high performance hydraulic oil based on satured esters.
exceeds DIN ISO 15380 HEES
VDMA 24568
DIN 51524-2 excluding wet ISO4263-1
DIN 51524-3 excluding wet ISO4263-1
Swedish Standard SS155434
Ecolabel Euromargerite
Austrian Ecolabel
Divinol Bio-Hydraulik can easily be used for hydraulic systems in forestry, construction or engineering industry in environment sensitive areas. Among others, Divinol Bio-Hydraulik is suitable for:
Harvesters and other forestry
Excavators and trucks for example in water protection areas
Fork lifts, telescop loaders and cranes
Compressors
Water weir hydraulics
If Divinol Bio-Hydraulik is used in a hydraulic system, which was previously working with mineral hydraulic oil, Divinol Bio-Hydraulik can dissolve existing deposits in the hydraulic system. Before using Divinol Bio-Hydraulik rinse the hydraulic system and empty it completely - do not mix with mineral hydraulic oil. When changing to biodergradable hydraulic fluids, please regard the requirements of the VDMA 24569 as well as the instructions of the machine manufacturers.
Divinol Haftöl ISO 460
Art-Nr.: 86361
Equivalent to Divinol Haftöl ISO 68 but viscosity
460 mm²/s/40°C.
Divinol Haftöl ISO 460 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 460 is preferred used in the textile, printing, paper and woodworking industry. Furthermore, the product is used as reciprocating saw oil for lubrication of bearings, articulations, bolts, sliding guides and transport chains at reciprocating saws. The selection of the adequate viscosity depends on the type of the individual lubricating points, provided that the viscosity is not prescribed by the machine manufacturer.
Art-Nr.: 86361
Equivalent to Divinol Haftöl ISO 68 but viscosity
460 mm²/s/40°C.
Divinol Haftöl ISO 460 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 460 is preferred used in the textile, printing, paper and woodworking industry. Furthermore, the product is used as reciprocating saw oil for lubrication of bearings, articulations, bolts, sliding guides and transport chains at reciprocating saws. The selection of the adequate viscosity depends on the type of the individual lubricating points, provided that the viscosity is not prescribed by the machine manufacturer.
Divinol Haftöl ISO 320
Art-Nr.: 86351
Equivalent to Divinol Haftöl ISO 68 but viscosity
320 mm²/s/40°C.
Divinol Haftöl ISO 320 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 320 is preferred used in the textile, printing, paper and woodworking industry. Furthermore, the product is used as reciprocating saw oil for lubrication of bearings, articulations, bolts, sliding guides and transport chains at reciprocating saws. The selection of the adequate viscosity depends on the type of the individual lubricating points, provided that the viscosity is not prescribed by the machine manufacturer.
Art-Nr.: 86351
Equivalent to Divinol Haftöl ISO 68 but viscosity
320 mm²/s/40°C.
Divinol Haftöl ISO 320 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 320 is preferred used in the textile, printing, paper and woodworking industry. Furthermore, the product is used as reciprocating saw oil for lubrication of bearings, articulations, bolts, sliding guides and transport chains at reciprocating saws. The selection of the adequate viscosity depends on the type of the individual lubricating points, provided that the viscosity is not prescribed by the machine manufacturer.
Divinol Haftöl ISO 220
Art-Nr.: 86344
Equivalent to Divinol Haftöl ISO 68 but viscosity
220 mm²/s/40°C.
Divinol Haftöl ISO 220 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 220 is preferred used in the textile, printing, paper and woodworking industry. Furthermore, the product is used as reciprocating saw oil for lubrication of bearings, articulations, bolts, sliding guides and transport chains at reciprocating saws. The selection of the adequate viscosity depends on the type of the individual lubricating points, provided that the viscosity is not prescribed by the machine manufacturer.
Art-Nr.: 86344
Equivalent to Divinol Haftöl ISO 68 but viscosity
220 mm²/s/40°C.
Divinol Haftöl ISO 220 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 220 is preferred used in the textile, printing, paper and woodworking industry. Furthermore, the product is used as reciprocating saw oil for lubrication of bearings, articulations, bolts, sliding guides and transport chains at reciprocating saws. The selection of the adequate viscosity depends on the type of the individual lubricating points, provided that the viscosity is not prescribed by the machine manufacturer.
Divinol Haftöl ISO 150
Art-Nr.: 86333
Equivalent to Divinol Haftöl ISO 68 but viscosity
150 mm²/s/40°C.
Divinol Haftöl ISO 150 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 150 is preferred used in the textile, printing, paper and woodworking industry.
Art-Nr.: 86333
Equivalent to Divinol Haftöl ISO 68 but viscosity
150 mm²/s/40°C.
Divinol Haftöl ISO 150 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 150 is preferred used in the textile, printing, paper and woodworking industry.
Divinol Haftöl ISO 100
Art-Nr.: 86323
Equivalent to Divinol Haftöl ISO 68 but viscosity
100 mm²/s/40°C.
Divinol Haftöl ISO 100 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 100 is preferred used in the textile, printing, paper and woodworking industry.
Art-Nr.: 86323
Equivalent to Divinol Haftöl ISO 68 but viscosity
100 mm²/s/40°C.
Divinol Haftöl ISO 100 is especially used as sliding and bearing oil and is frequently used for open lubricating points. Divinol Haftöl ISO 100 is preferred used in the textile, printing, paper and woodworking industry.
Divinol Haftöl ISO 68
Art-Nr.: 86314
The product is especially used as sliding and bearing oil and is frequently used for open lubricating points.
Divinol Haftöl ISO 68 is especially used as sliding and bearing oil and is frequently used for open
lubricating points. It is preferred used in the textile, printing, paper and woodworking industry..
Art-Nr.: 86314
The product is especially used as sliding and bearing oil and is frequently used for open lubricating points.
Divinol Haftöl ISO 68 is especially used as sliding and bearing oil and is frequently used for open
lubricating points. It is preferred used in the textile, printing, paper and woodworking industry..
Divinol Gerätereiniger Forte
Art-Nr.: 12300
Multipurpose cleaner
The dirty parts should be sprayed with Divinol Gerätereiniger Forte and left for some minutes (no drying of Divinol Gerätereiniger Forte on plane surfaces) . A paint brush can be used to clean the parts. Afterwards the parts should be rinsed with water, if possible with high pressure and at last the parts should be dried with compressed air. If the parts are very dirty put them in a cleaner bath for several hours.
Art-Nr.: 12300
Multipurpose cleaner
The dirty parts should be sprayed with Divinol Gerätereiniger Forte and left for some minutes (no drying of Divinol Gerätereiniger Forte on plane surfaces) . A paint brush can be used to clean the parts. Afterwards the parts should be rinsed with water, if possible with high pressure and at last the parts should be dried with compressed air. If the parts are very dirty put them in a cleaner bath for several hours.
Divinol Bio*-Chain Oil RF
Art-Nr.: 26160
Semi-synthetic high-performance saw-chain oil rapidly biodegradable within 28 days > 60% according to OECD 301.
Due to high performance reserves, an optimum full greasing is guaranteed in summer and winter even under
difficult application conditions.
Divinol Bio*-Chain Oil RF is ideal for lubricating high performance chain saws of all types.
For cleaning chain saws we recommend Divinol Gerätereiniger Forte.
Art-Nr.: 26160
Semi-synthetic high-performance saw-chain oil rapidly biodegradable within 28 days > 60% according to OECD 301.
Due to high performance reserves, an optimum full greasing is guaranteed in summer and winter even under
difficult application conditions.
Divinol Bio*-Chain Oil RF is ideal for lubricating high performance chain saws of all types.
For cleaning chain saws we recommend Divinol Gerätereiniger Forte.
Divinol Bio-Kettenöl PM
Art-Nr.: 27750
High performance chain oil based on renewable raw materials, viscosity V40 = 70mm"/s with polymeric thickener and Ecolabel Euromagarite.
Ecolabel Euromargerite
Austrian Ecolabel
Chain saw oil for lubrication of high-performance chain saws. Best lubrication in summer and winter - even under hard conditions, due to high performance reserves. Divinol Bio-Kettenöl PM is stable for at least 36 months. For cleaning Divinol recommend`s Divinol Gerätereiniger Forte.
Art-Nr.: 27750
High performance chain oil based on renewable raw materials, viscosity V40 = 70mm"/s with polymeric thickener and Ecolabel Euromagarite.
Ecolabel Euromargerite
Austrian Ecolabel
Chain saw oil for lubrication of high-performance chain saws. Best lubrication in summer and winter - even under hard conditions, due to high performance reserves. Divinol Bio-Kettenöl PM is stable for at least 36 months. For cleaning Divinol recommend`s Divinol Gerätereiniger Forte.
Divinol Bio*-Kettenöl 220
Art-Nr.: 26110
Biodegradable chain saw harverster oil - V40 = 220 mm / s on rapeseed oil-based
Divinol Bio*-Kettenöl 220 offers due to its definitive adhesive strength and the use of wear preventive additives best lubrication of high performance chain saws in e.g. wood working machines. Best lubrication even under hard conditions of use due to the high performance reserves. The product is stable for at least 18 months. For cleaning Divinol recommends our DIVINOL Gerätereiniger Forte.
Art-Nr.: 26110
Biodegradable chain saw harverster oil - V40 = 220 mm / s on rapeseed oil-based
Divinol Bio*-Kettenöl 220 offers due to its definitive adhesive strength and the use of wear preventive additives best lubrication of high performance chain saws in e.g. wood working machines. Best lubrication even under hard conditions of use due to the high performance reserves. The product is stable for at least 18 months. For cleaning Divinol recommends our DIVINOL Gerätereiniger Forte.
Divinol Bio-Kettenöl R
Art-Nr.: 21820
Biodegradable chain saw oil awarded with the Blue Angel and EU - Ecolabel - also KWF-Test approval mark.
Chainsaw oil for the lubrication of high-performance chainsaws of all kinds of manufacturers. Optimum lubrication in summer and winter, even under severe conditions due to high reserve capacities even when sawing hardwood. The producthas a storage life of minimum 18 months. For cleaning the chainsaws we recommend Divinol Gerätereiniger Forte. Keep out of the reach of children. Make sure that unused quantities cannot leak into the sewage system, waters or soil. Product residues must be disposed of at a local waste collection point. Pass only completely empty containers for recycling
Art-Nr.: 21820
Biodegradable chain saw oil awarded with the Blue Angel and EU - Ecolabel - also KWF-Test approval mark.
Chainsaw oil for the lubrication of high-performance chainsaws of all kinds of manufacturers. Optimum lubrication in summer and winter, even under severe conditions due to high reserve capacities even when sawing hardwood. The producthas a storage life of minimum 18 months. For cleaning the chainsaws we recommend Divinol Gerätereiniger Forte. Keep out of the reach of children. Make sure that unused quantities cannot leak into the sewage system, waters or soil. Product residues must be disposed of at a local waste collection point. Pass only completely empty containers for recycling
Divinol Kettenöl TS 220
Art-Nr.: 27770
Resin-free, semi-synthetic high performance chain saw oil V40 = 220 mm ² / s
This newly developed chain-saw oil is ideal for lubricating high performance chain saws of all types. An optimum full greasing is guaranteed in summer and winter even under difficult usage conditions, due to high performance reserves. For cleaning chain saws etc.. Divinol recommends DIVINOL Gerätereiniger Forte.
Art-Nr.: 27770
Resin-free, semi-synthetic high performance chain saw oil V40 = 220 mm ² / s
This newly developed chain-saw oil is ideal for lubricating high performance chain saws of all types. An optimum full greasing is guaranteed in summer and winter even under difficult usage conditions, due to high performance reserves. For cleaning chain saws etc.. Divinol recommends DIVINOL Gerätereiniger Forte.
Divinol Kettenöl H
Art-Nr.: 84150
Mineral chain saw oil V40= 100 mm²/s
Divinol Kettenöl H offers adhesive strength and due to wear preventive additives best lubrication for chain saws. Optimal lubrication even under hard conditions with high performance reserves. For cleaning Divinol recommends our DIVINOL Gerätereiniger Forte.
Art-Nr.: 84150
Mineral chain saw oil V40= 100 mm²/s
Divinol Kettenöl H offers adhesive strength and due to wear preventive additives best lubrication for chain saws. Optimal lubrication even under hard conditions with high performance reserves. For cleaning Divinol recommends our DIVINOL Gerätereiniger Forte.
Divinol Spezial Rasenmäheröl HD 30
Art-Nr.: 48340
API SJ / CF
Heavy Duty lawn mower oil SAE 30
Art-Nr.: 48340
API SJ / CF
Heavy Duty lawn mower oil SAE 30
Divinol Spezial-Schneefräsenöl 5W-30
Art-Nr.: 49201
API SL; ACEA A1-04/B1-04
High-tec rotary snow plow oil SAE 5W30
Divinol Spezial-Schneefräsenöl 5W-30 can be used especially for spark-ignition engines of rotary snow plows made by Honda and Tecumseh. (Please follow the instructions of the corresponding manufacturers)
Art-Nr.: 49201
API SL; ACEA A1-04/B1-04
High-tec rotary snow plow oil SAE 5W30
Divinol Spezial-Schneefräsenöl 5W-30 can be used especially for spark-ignition engines of rotary snow plows made by Honda and Tecumseh. (Please follow the instructions of the corresponding manufacturers)
Divinol Rasenmäheröl Spezial 10W-30
Art-Nr.: 48350
API SJ/CF
Modern lawn mower oil API SJ SAE 10W30
Check new engines before the start regarding oil level and if necessary please see manufacturer's instructions. Check oil level regularly. Oil changes according to manufacturer's recommendation. Divinol Rasenmäheröl Spezial 10W-30 is suitable for Honda engines.
Art-Nr.: 48350
API SJ/CF
Modern lawn mower oil API SJ SAE 10W30
Check new engines before the start regarding oil level and if necessary please see manufacturer's instructions. Check oil level regularly. Oil changes according to manufacturer's recommendation. Divinol Rasenmäheröl Spezial 10W-30 is suitable for Honda engines.
Divinol special lawn mower oil HD 30
Art-Nr .: 48330
API SF / CD
Heavy Duty Lawn Mower Oil SAE 30
For new engines, check the oil level before starting and, if necessary, fill it according to the manufacturer's instructions. Regularly check the oil level. Carry out oil change according to the manufacturer 's instructions.
Art-Nr .: 48330
API SF / CD
Heavy Duty Lawn Mower Oil SAE 30
For new engines, check the oil level before starting and, if necessary, fill it according to the manufacturer's instructions. Regularly check the oil level. Carry out oil change according to the manufacturer 's instructions.
Divinol Syntrac TS 10W-40
Art-Nr.: 51910
API CG-4; API GL-4/GL-5 low torque application; ACEA E3; HVLP (DIN 51524 Teil 2/3)
STOU oil SAE 10W-40
Super Tractor Oil Universal (STOU) for universal usage in engines, gears, “wet brakes” and hydraulic systems of agricultural equipment and construction machinery.
Art-Nr.: 51910
API CG-4; API GL-4/GL-5 low torque application; ACEA E3; HVLP (DIN 51524 Teil 2/3)
STOU oil SAE 10W-40
Super Tractor Oil Universal (STOU) for universal usage in engines, gears, “wet brakes” and hydraulic systems of agricultural equipment and construction machinery.