Divinol Schalwachs HFP
Art-Nr.: 04410
Liquid formwork wax especially for first treatment of wooden formworks
##Artbez1## may be applied with common spraying systems.The consumption is about 40-60 g/m2 depending on the structure depth.
##Artbez1## is mainly used for wooden and plastic-coated formworks as well as for steel formworks (tongued and grooved rough boards), especially for initial treatment of the wooden formworks. ##Artbez1## is rain-resistant. When using the product you will receive clean and even surfaces.
Art-Nr.: 04410
Liquid formwork wax especially for first treatment of wooden formworks
##Artbez1## may be applied with common spraying systems.The consumption is about 40-60 g/m2 depending on the structure depth.
##Artbez1## is mainly used for wooden and plastic-coated formworks as well as for steel formworks (tongued and grooved rough boards), especially for initial treatment of the wooden formworks. ##Artbez1## is rain-resistant. When using the product you will receive clean and even surfaces.
Divinol Mischerschutz DW
Art-Nr.: 30080
Mixer protection for universal use with dewatering properties.
Divinol Mischerschutz DW should be applied daily before the start-up or after cleaning the machines (application by spraying pistol, compressore, manual spray gun or brush). A fine film is applied on machines and containers. Over-dosage has to be avoided. The product can be applied at temperatures up to + 80°C.
Divinol Mischerschutz DW is a mixer protection for concrete mixer trucks, concrete pumps, concrete mixing facilities (compulsory mixer), construction vehicles etc. It prevents effectively the adhesion of concrete and mortar residues on steel, metal and painted surfaces. The product is well-suited for the use in factories for precast concrete components and cast concrete stones.
Divinol Mischerschutz DW merges under the mixed concrete and thus creates a highly effective separation film between mixer and concrete. The product can be used up to +80°C and can separate dry concrete mixtures as well.
Divinol Mischerschutz DW should be applied daily before starting up or after cleaning the machine (application
by spray gun, compressor, hand sprayer or brush!).
When using Divinol Mischerschutz DW the setting of the concrete will not be prevented or delayed - provided that the processing instructions have been followed.
Art-Nr.: 30080
Mixer protection for universal use with dewatering properties.
Divinol Mischerschutz DW should be applied daily before the start-up or after cleaning the machines (application by spraying pistol, compressore, manual spray gun or brush). A fine film is applied on machines and containers. Over-dosage has to be avoided. The product can be applied at temperatures up to + 80°C.
Divinol Mischerschutz DW is a mixer protection for concrete mixer trucks, concrete pumps, concrete mixing facilities (compulsory mixer), construction vehicles etc. It prevents effectively the adhesion of concrete and mortar residues on steel, metal and painted surfaces. The product is well-suited for the use in factories for precast concrete components and cast concrete stones.
Divinol Mischerschutz DW merges under the mixed concrete and thus creates a highly effective separation film between mixer and concrete. The product can be used up to +80°C and can separate dry concrete mixtures as well.
Divinol Mischerschutz DW should be applied daily before starting up or after cleaning the machine (application
by spray gun, compressor, hand sprayer or brush!).
When using Divinol Mischerschutz DW the setting of the concrete will not be prevented or delayed - provided that the processing instructions have been followed.
Divinol Mischerschutz Spezial
Art-Nr.: 91560
Mixer protection for universal use with high corrosion protection.
Divinol Mischerschutz Spezial is a mixer protection for universal use in concrete mixer trucks, concrete pumps, concrete mixing facilities, construction vehicles etc. It prevents the adhesion of concrete on steel, metal and painted surfaces. The product does not affect rubber and plastic material and it preserves all painted parts.
Divinol Mischerschutz Spezial should be applied daily before starting up the vehicles and construction machinery
(application by spray gun, compressor, hand sprayer or brush!).
When using Divinol Mischerschutz Spezial the qualitiy of the concrete will not be affected - provided that the processing instructions have been followed.
Art-Nr.: 91560
Mixer protection for universal use with high corrosion protection.
Divinol Mischerschutz Spezial is a mixer protection for universal use in concrete mixer trucks, concrete pumps, concrete mixing facilities, construction vehicles etc. It prevents the adhesion of concrete on steel, metal and painted surfaces. The product does not affect rubber and plastic material and it preserves all painted parts.
Divinol Mischerschutz Spezial should be applied daily before starting up the vehicles and construction machinery
(application by spray gun, compressor, hand sprayer or brush!).
When using Divinol Mischerschutz Spezial the qualitiy of the concrete will not be affected - provided that the processing instructions have been followed.
Divinol Asphalt MP
Art-Nr.: 27430
Divinol Asphalt MP is a water-miscible separating agent specially developed for polymer modified asphalt
Low noise asphalt : Use as a concentrate. Polymer modified asphalt : Use as a concentrate or diluted with water (ratio 1:1) depending on the area of application (e. g. rollers). Mix thoroughly when diluting. Common binder courses and asphalts : Use as a concentrate or diluted with water (up to a mixing ratio of 1:3) depending on the area of application. Mix thoroughly when diluting.
Divinol Asphalt MP has especially been developed for stone mastic asphalt (polymer modified asphalt - PmB) as well as for open-pore asphalt (OPA - low noise asphalt). The product is also suitable for common binder courses and asphalts as well as for asphalt mixing units. Divinol Asphalt MP does not leave any residues/stains on concrete and asphalt and does not attack asphalt. Additionally the product offers a load safety for dumpers as the loading area stays free from oily residues.
At first use, please prepare Divinol Asphalt MP with the below-mentioned maximum concentration. A further dilution can be carried out step by step, as long as the product retains its separating property.
Art-Nr.: 27430
Divinol Asphalt MP is a water-miscible separating agent specially developed for polymer modified asphalt
Low noise asphalt : Use as a concentrate. Polymer modified asphalt : Use as a concentrate or diluted with water (ratio 1:1) depending on the area of application (e. g. rollers). Mix thoroughly when diluting. Common binder courses and asphalts : Use as a concentrate or diluted with water (up to a mixing ratio of 1:3) depending on the area of application. Mix thoroughly when diluting.
Divinol Asphalt MP has especially been developed for stone mastic asphalt (polymer modified asphalt - PmB) as well as for open-pore asphalt (OPA - low noise asphalt). The product is also suitable for common binder courses and asphalts as well as for asphalt mixing units. Divinol Asphalt MP does not leave any residues/stains on concrete and asphalt and does not attack asphalt. Additionally the product offers a load safety for dumpers as the loading area stays free from oily residues.
At first use, please prepare Divinol Asphalt MP with the below-mentioned maximum concentration. A further dilution can be carried out step by step, as long as the product retains its separating property.
Divinol Asphalt WMB
Art-Nr.: 09480
Water-miscible release agent on the basis of renewable raw materials for the bitumen and asphalt industry. Easily biodegredable according to OECD 301 c.
First add concentrate, then add water by stirring continuously.
for hot and mastic asphalt: 1:20
in concrete mixing facilities: 1:15 up to 1:10
Divinol Asphalt WMB is a release agent for asphalt-coated gravel in base layers. An excellent release effect on transport equipment, machinery and rubber rolls is achieved.
Art-Nr.: 09480
Water-miscible release agent on the basis of renewable raw materials for the bitumen and asphalt industry. Easily biodegredable according to OECD 301 c.
First add concentrate, then add water by stirring continuously.
for hot and mastic asphalt: 1:20
in concrete mixing facilities: 1:15 up to 1:10
Divinol Asphalt WMB is a release agent for asphalt-coated gravel in base layers. An excellent release effect on transport equipment, machinery and rubber rolls is achieved.
Divinol Asphaltlöser
Art-Nr.: 27530
Also dissolves strong bitumen adhesives pallets, cylinders, asphalt pavers and car body parts
Divinol Asphaltlöser is used undiluted.
The product removes reliably and quickly even strong contamination of bitumen on trucks, rollers, asphalt pavers and body parts. Divinol Asphaltlöser is also suitable when using oil separators.
The product is applied by spraying or brushing. After a certain exposure time - depending on the degree of contamination - the dirt particles can be removed more easily by mechanical devices (scrapers or high-pressure cleaners). Varnish and PVC are not affected by Divinol Asphaltlöser.
Please try our product on a hidden spot before applying it on sensitive surfaces.
Art-Nr.: 27530
Also dissolves strong bitumen adhesives pallets, cylinders, asphalt pavers and car body parts
Divinol Asphaltlöser is used undiluted.
The product removes reliably and quickly even strong contamination of bitumen on trucks, rollers, asphalt pavers and body parts. Divinol Asphaltlöser is also suitable when using oil separators.
The product is applied by spraying or brushing. After a certain exposure time - depending on the degree of contamination - the dirt particles can be removed more easily by mechanical devices (scrapers or high-pressure cleaners). Varnish and PVC are not affected by Divinol Asphaltlöser.
Please try our product on a hidden spot before applying it on sensitive surfaces.
Divinol Asphalt Plus WMB
Art-Nr.: 94270
Water-miscible bitumen and asphalt release agent wooden packing plates to produce concrete stones.
First add concentrate, then add water by stirring continuously.
Bitumen and asphalt mixing plants (depending on the bituminous mixture): 1:3 - 1:6 diluted with water
Formwork oil: 1:10 - 1:15 diluted with water
Divinol Asphalt Plus WMB is a water-miscible release agent for bitumen and asphalt mixing machines,
very well suitable as release agent for wooden pallets for the production of concrete blocks.
Divinol Asphalt Plus WMB is also usable as a water-miscible formwork oil concentrate
Art-Nr.: 94270
Water-miscible bitumen and asphalt release agent wooden packing plates to produce concrete stones.
First add concentrate, then add water by stirring continuously.
Bitumen and asphalt mixing plants (depending on the bituminous mixture): 1:3 - 1:6 diluted with water
Formwork oil: 1:10 - 1:15 diluted with water
Divinol Asphalt Plus WMB is a water-miscible release agent for bitumen and asphalt mixing machines,
very well suitable as release agent for wooden pallets for the production of concrete blocks.
Divinol Asphalt Plus WMB is also usable as a water-miscible formwork oil concentrate
Divinol Asphalt AE
Art-Nr.: 12040
Divinol Asphalt AE is a water-soluble and pasty separating agent for wooden buckets with hot asphalt.
Divinol Asphalt AE is used in mixture 1:20 diluted with water.
Divinol Asphalt AE is used for wood-buckets which are used for hot-asphalt and bitumen.
Art-Nr.: 12040
Divinol Asphalt AE is a water-soluble and pasty separating agent for wooden buckets with hot asphalt.
Divinol Asphalt AE is used in mixture 1:20 diluted with water.
Divinol Asphalt AE is used for wood-buckets which are used for hot-asphalt and bitumen.
Divinol High Liquid Surface
Art-Nr.: 22230
High-quality concrete release agent for the production of exposed concrete in civil engineering. Excellent results with smooth and demanding surfaces.
Divinol High Liquid Surface is a high quality concrete release agent for the production of exposed concrete in civil engineering , and achieves excellent results, especially with smooth and demanding surfaces. The formation of pores and shrinkholes is reduced significantly when using Divinol High Liquid Surface. Hydrophilic additives lower the surface tension of the release agent and can be mounted easily on the formwork and offer an excellent wetting. Divinol High Liquid Surface is especially suitable for all-plastic formworks as well as plastic-coated formworks based on polypropylene.The product can also be used in machines as well as in construction and transport vehicles. Divinol High Liquid Surface can be applied as delivered by spraying, brushing and rolling. When used as intended, Divinol High Liquid Surface has no negative influence on the subsequent treatments of the concrete surfaces (plaster, tiles, wallpaper, colour).
Use on heated formworks is possible.
Art-Nr.: 22230
High-quality concrete release agent for the production of exposed concrete in civil engineering. Excellent results with smooth and demanding surfaces.
Divinol High Liquid Surface is a high quality concrete release agent for the production of exposed concrete in civil engineering , and achieves excellent results, especially with smooth and demanding surfaces. The formation of pores and shrinkholes is reduced significantly when using Divinol High Liquid Surface. Hydrophilic additives lower the surface tension of the release agent and can be mounted easily on the formwork and offer an excellent wetting. Divinol High Liquid Surface is especially suitable for all-plastic formworks as well as plastic-coated formworks based on polypropylene.The product can also be used in machines as well as in construction and transport vehicles. Divinol High Liquid Surface can be applied as delivered by spraying, brushing and rolling. When used as intended, Divinol High Liquid Surface has no negative influence on the subsequent treatments of the concrete surfaces (plaster, tiles, wallpaper, colour).
Use on heated formworks is possible.
Divinol High Liquid
Art-Nr.: 84810
Concrete release agent specially made for GfK formwork facing and coated formwork for high-quality concrete parts.
Due to high quality base oils Divinol High Liquid can be used for the production of quality concrete parts. The product is suitable for different kinds of formwork, e. g. wood as well as coated formworks in the civil construction sector.
Divinol High Liquid can also be used as mixer protection in machines, construction and transport vehicles.
The use of Divinol High Liquid guarantees an easy and clean demoulding as well as optimum surface results.
Divinol High Liquid can be applied as delivered by spraying, brushing and rolling as thin as possible.
When used as intended, Divinol High Liquid has no negative influence on the subsequent treatments of the concrete surfaces (plaster, tiles, wallpaper, colour).
Art-Nr.: 84810
Concrete release agent specially made for GfK formwork facing and coated formwork for high-quality concrete parts.
Due to high quality base oils Divinol High Liquid can be used for the production of quality concrete parts. The product is suitable for different kinds of formwork, e. g. wood as well as coated formworks in the civil construction sector.
Divinol High Liquid can also be used as mixer protection in machines, construction and transport vehicles.
The use of Divinol High Liquid guarantees an easy and clean demoulding as well as optimum surface results.
Divinol High Liquid can be applied as delivered by spraying, brushing and rolling as thin as possible.
When used as intended, Divinol High Liquid has no negative influence on the subsequent treatments of the concrete surfaces (plaster, tiles, wallpaper, colour).
Divinol B Premium
Art-Nr.: 25340
High-quality release agent can be used for all common types of formwork in concrete factories and in the building construction: for less or non-absorbent formwork (phenlo resin formwork) as well as formwork made of plastic material (polypropylene).
Divinol B Premium can be applied in the state at time of delivery by spraying, brushing or rolling without any problems.
Divinol B Premium can be used for all common types of formwork in concrete factories and in the building construction: for less or non-absorbent formwork (phenlo resin formwork) as well as formwork made of plastic
material (polypropylene).
If used properly, Divinol B Premium does not allow direct contact of the formwork with the concrete surface.
Thus, damages to the surface of the concrete can be prevented and reworking can be avoided. The life-time
of the formwork will be extended and therefore the profitability in general. Moreover, an environmental hazard
is excluded.
If used properly, Divinol B Premium does not influence negatively the subsequent treatment of the concrete
surface (plastering, ceramics, wallpaper, paint).
Use on heated formworks is possible.
Art-Nr.: 25340
High-quality release agent can be used for all common types of formwork in concrete factories and in the building construction: for less or non-absorbent formwork (phenlo resin formwork) as well as formwork made of plastic material (polypropylene).
Divinol B Premium can be applied in the state at time of delivery by spraying, brushing or rolling without any problems.
Divinol B Premium can be used for all common types of formwork in concrete factories and in the building construction: for less or non-absorbent formwork (phenlo resin formwork) as well as formwork made of plastic
material (polypropylene).
If used properly, Divinol B Premium does not allow direct contact of the formwork with the concrete surface.
Thus, damages to the surface of the concrete can be prevented and reworking can be avoided. The life-time
of the formwork will be extended and therefore the profitability in general. Moreover, an environmental hazard
is excluded.
If used properly, Divinol B Premium does not influence negatively the subsequent treatment of the concrete
surface (plastering, ceramics, wallpaper, paint).
Use on heated formworks is possible.
Divinol SYN BE
Art-Nr.: 22040
A solvent-free, non-water-miscible release agent for all common types of moulds. Awarded with the Blue Angel (RAL-UZ 178).
Divinol SYN BE can be used for all common types of formwork in civil engineering: for non-absorbent or less absorbent formwork (phenolic resin formwork facing) as well as for all-plastic and plastic coated formworks. Use on heated formworks is possible. The product has proven its worth for manufacturing of concrete pipes and chamber cones. Divinol SYN BE can also be used as mixer protection.
Divinol SYN BE can be applied in the state at time of delivery by spraying, brushing or rolling without any problems.
If used properly Divinol SYN BE does not influence negatively the subsequent treatment of the concrete surface (plastering, ceramics, wallpaper, paint).
Art-Nr.: 22040
A solvent-free, non-water-miscible release agent for all common types of moulds. Awarded with the Blue Angel (RAL-UZ 178).
Divinol SYN BE can be used for all common types of formwork in civil engineering: for non-absorbent or less absorbent formwork (phenolic resin formwork facing) as well as for all-plastic and plastic coated formworks. Use on heated formworks is possible. The product has proven its worth for manufacturing of concrete pipes and chamber cones. Divinol SYN BE can also be used as mixer protection.
Divinol SYN BE can be applied in the state at time of delivery by spraying, brushing or rolling without any problems.
If used properly Divinol SYN BE does not influence negatively the subsequent treatment of the concrete surface (plastering, ceramics, wallpaper, paint).
Divinol Surface Premium KS
Art-Nr.: 22560
High Quality release agent for fair-faced concrete with high corrosion protection
Divinol Surface Premium KS is a concrete release agent for pre-cast factories. This product can be used for
high quality fair-faced concrete surfaces, self-compacting concretes as well as for coloured concretes.
Divinol Surface Premium KS is especially suitable for heated and unheated steel formworks.
Divinol Surface Premium KS is preferably used as delivered by spraying.
Art-Nr.: 22560
High Quality release agent for fair-faced concrete with high corrosion protection
Divinol Surface Premium KS is a concrete release agent for pre-cast factories. This product can be used for
high quality fair-faced concrete surfaces, self-compacting concretes as well as for coloured concretes.
Divinol Surface Premium KS is especially suitable for heated and unheated steel formworks.
Divinol Surface Premium KS is preferably used as delivered by spraying.
Divinol Surface KS
Art-Nr.: 27660
Solvent-based release agent for all common types of molds with strong corrosion protection
Divinol Surface KS should can be used as delivered through spraying, brushing or rolling.
Considering safety technical principles and regulations, usage on heated formworks is possible
Art-Nr.: 27660
Solvent-based release agent for all common types of molds with strong corrosion protection
Divinol Surface KS should can be used as delivered through spraying, brushing or rolling.
Considering safety technical principles and regulations, usage on heated formworks is possible
Divinol Surface Premium
Art-Nr.: 96520
Solvent-containing release agent for fair-faced concrete in quality SB 3, SB 4. Also for coloured concrete.
Divinol Surface Premium can be applied in the state at time of delivery by spraying, brushing or rolling without any problems.
Divinol Surface Premium is a release agent for high quality fair-faced concrete, preferably used in the engineering and construction sector. The product is suitable for all absorbent and non-absorbent formworks, e.g. phenolic resin formwork as well as formwork made of plastic material (polypropylene). Considering safety technical principles and regulations, usage on heated formworks is possible.
If used properly, Divinol Surface Premium does not influence negatively the subsequent treatment of the concrete
surface (plastering, ceramics, wallpaper, paint).
Art-Nr.: 96520
Solvent-containing release agent for fair-faced concrete in quality SB 3, SB 4. Also for coloured concrete.
Divinol Surface Premium can be applied in the state at time of delivery by spraying, brushing or rolling without any problems.
Divinol Surface Premium is a release agent for high quality fair-faced concrete, preferably used in the engineering and construction sector. The product is suitable for all absorbent and non-absorbent formworks, e.g. phenolic resin formwork as well as formwork made of plastic material (polypropylene). Considering safety technical principles and regulations, usage on heated formworks is possible.
If used properly, Divinol Surface Premium does not influence negatively the subsequent treatment of the concrete
surface (plastering, ceramics, wallpaper, paint).
Divinol Aqua EM
Art-Nr.: 25170
High-quality, solvent-free release agent emulsion for filigree-ceiling and hollow walls with high-quality corrosion protection.
Divinol Aqua EM has to be deployed undiluted as delivered.
Divinol Aqua EM is a high quality water-based emulsion, ready for use mostly for filigree-ceiling and hollow walls. It ist applicable for non-absorbent moulds. Furthermore, Divinol Aqua EM is suitable for steel forms.
By using Divinol Aqua EM an optimum concrete surface quality can be achieved.
Divinol Aqua EM can be easily applied by spraying, brushing or rolling. Recommended drying time: at least
20 minutes at dry weather. Due to the characteristics of the product the subsequent treatment of the concrete surface (plastering, ceramic, wallpaper, paint) will not be influenced negatively - if properly applied
Art-Nr.: 25170
High-quality, solvent-free release agent emulsion for filigree-ceiling and hollow walls with high-quality corrosion protection.
Divinol Aqua EM has to be deployed undiluted as delivered.
Divinol Aqua EM is a high quality water-based emulsion, ready for use mostly for filigree-ceiling and hollow walls. It ist applicable for non-absorbent moulds. Furthermore, Divinol Aqua EM is suitable for steel forms.
By using Divinol Aqua EM an optimum concrete surface quality can be achieved.
Divinol Aqua EM can be easily applied by spraying, brushing or rolling. Recommended drying time: at least
20 minutes at dry weather. Due to the characteristics of the product the subsequent treatment of the concrete surface (plastering, ceramic, wallpaper, paint) will not be influenced negatively - if properly applied
Divinol Tube KS
Art-Nr.: 27820
High-quality release agent with excellent corrosion protection can be used for tunnel construction, for concrete pipe construction and especially for vertical formwork. Additionally for framework and rental stock and storage of formwork elements outdoors.
Divinol Tube KS has proved itself for tunnel works and is suitable for plastic and steel formwork . The product has an excellent corrosion protection and forms a protective film on the mould frame. This does not affect the concrete surface negatively. Divinol Tube KS is particularly used in formwork rental warehouse for the storage of formwork elements outdoors. Divinol Tube KS should be used as supplied by spraying , brushing or rolling.
Use on heated formworks is possible.
Art-Nr.: 27820
High-quality release agent with excellent corrosion protection can be used for tunnel construction, for concrete pipe construction and especially for vertical formwork. Additionally for framework and rental stock and storage of formwork elements outdoors.
Divinol Tube KS has proved itself for tunnel works and is suitable for plastic and steel formwork . The product has an excellent corrosion protection and forms a protective film on the mould frame. This does not affect the concrete surface negatively. Divinol Tube KS is particularly used in formwork rental warehouse for the storage of formwork elements outdoors. Divinol Tube KS should be used as supplied by spraying , brushing or rolling.
Use on heated formworks is possible.
Divinol Plast High Liquid
Art-Nr.: 20650
for high-quality surfaces, particularly for plastic formworks and structure matrices (polyurethane-based)
The product can be used in concrete factories, mainly for plastic surfaces, form liners (polyurethane basis), polystyrene, GfK, as well as for steel formworks, non or slightly absorbent formworks and wooden formworks with planed or rough surfaces and plastic facing formworks. The product is insensitive against over-dosage. The use of Divinol Plast High Liquid avoids direct contact of the formworks with the concrete surface and therefore enables a problem-free separation. Thus damages to the concrete surface are prevented and postprocessing avoided. The life-time of the formworks is prolonged and the general economy increased. Divinol Plast High Liquid can be applied as delivered by spraying, brushing and rolling. When used as intended, Divinol Plast High Liquid has no negative influence on the subsequent treatments of the concrete surfaces (plaster, tiles, wallpaper, colour).
Use on heated formworks is possible.
Art-Nr.: 20650
for high-quality surfaces, particularly for plastic formworks and structure matrices (polyurethane-based)
The product can be used in concrete factories, mainly for plastic surfaces, form liners (polyurethane basis), polystyrene, GfK, as well as for steel formworks, non or slightly absorbent formworks and wooden formworks with planed or rough surfaces and plastic facing formworks. The product is insensitive against over-dosage. The use of Divinol Plast High Liquid avoids direct contact of the formworks with the concrete surface and therefore enables a problem-free separation. Thus damages to the concrete surface are prevented and postprocessing avoided. The life-time of the formworks is prolonged and the general economy increased. Divinol Plast High Liquid can be applied as delivered by spraying, brushing and rolling. When used as intended, Divinol Plast High Liquid has no negative influence on the subsequent treatments of the concrete surfaces (plaster, tiles, wallpaper, colour).
Use on heated formworks is possible.
Divinol B Classic
Art-Nr.: 08920
Environmental friendly universal release agent. Can also be used as an asphalt release agent.
Divinol B Classic can be applied in the state at time of delivery by spraying, brushing or rolling without any problems.
Divinol B Classic can be used for all common types of formwork in concrete factories and in the building construction: for less or non-absorbent formwork (phenlo resin formwork) as well as formwork made of plastic
material.
If used properly, Divinol B Classic does not allow direct contact of the formwork with the concrete surface.
Thus, damages to the surface of the concrete can be prevented and re-working can be avoided. The life-time
of the formwork will be extended and therefore the profitability in general. Moreover, an environmental hazard
is excluded.
If used properly, Divinol B Classic does not influence negatively the subsequent treatment of the concrete
surface (plastering, ceramics, wallpaper, paint).
Art-Nr.: 08920
Environmental friendly universal release agent. Can also be used as an asphalt release agent.
Divinol B Classic can be applied in the state at time of delivery by spraying, brushing or rolling without any problems.
Divinol B Classic can be used for all common types of formwork in concrete factories and in the building construction: for less or non-absorbent formwork (phenlo resin formwork) as well as formwork made of plastic
material.
If used properly, Divinol B Classic does not allow direct contact of the formwork with the concrete surface.
Thus, damages to the surface of the concrete can be prevented and re-working can be avoided. The life-time
of the formwork will be extended and therefore the profitability in general. Moreover, an environmental hazard
is excluded.
If used properly, Divinol B Classic does not influence negatively the subsequent treatment of the concrete
surface (plastering, ceramics, wallpaper, paint).
Divinol Getriebe- Hydrauliköl TO-4 30
Art-Nr.: 49000
API GL-4
Gear & Hydraulic Fluid TO-4
Divinol Getriebe- Hydrauliköl TO-4 30 (gear and hydraulic oil) is suitable for highly loaded gear components of construction machines, e.g. in power shift gears, lateral driving gears, axle drives and wet breaks. Rattling of wet breaks can be avoided.
Art-Nr.: 49000
API GL-4
Gear & Hydraulic Fluid TO-4
Divinol Getriebe- Hydrauliköl TO-4 30 (gear and hydraulic oil) is suitable for highly loaded gear components of construction machines, e.g. in power shift gears, lateral driving gears, axle drives and wet breaks. Rattling of wet breaks can be avoided.